Twilight automatic with external probe PLUS 16A 230V AZ-112-PLUS F&F
- Twilight automatic with external probe PLUS 16A 230V AZ-112-PLUS F&F
Automatic twilight switch with external probe PLUS 16A 230V AZ-112-PLUS F&F
Product description
Twilight light switch with PLUS external probe included.
Mounting on a 35 mm rail.
Power supply 230 V. Maximum load 16 A.
Twilight lightswitch is used to control light sources or other energy consumers depending on the intensity of daylight - turns off lighting at dawn and turns on at dusk. Suitable for controlling lighting in the garden, park, exhibitions and store windows.
Operation
The AZ-112 PLUS twilight light switch should be installed in a place with constant access to natural daylight, and the change in its daily intensity will switch the lighting on and off. The time of lighting on can be set by the user with a potentiometer. Turning towards the "moon" - will switch on later, turning towards "sun" - will switch on earlier. Twilight light switch AZ-112 PLUS has a system that delays switching on and off the lighting, thus eliminating the influence of interference (e.g. lightning) on the operation of the device.
Power table
Technical data:
| Supply voltage | 230 V AC |
| Supply voltage tolerance | -10 ÷ 10 % |
| Maximum load current AC-1 | 16 A |
| Executive element | relay |
| Contact configuration | 1 × NO |
| Contact separation | YES |
| Tripping threshold - adjustable | 2 ÷ 1000 Lx |
| Tripping threshold - adjustable | approx. 7 Lx |
| Hysteresis | approx. 15 Lx |
| Delay of activation tripping | approx. 10 s |
| OFF tripping delay | approx. 20 s |
| Protection degree of the probe | IP65 |
| Photosensitive element | pLUS external probe |
| Connection | screw terminals 2.5 mm² |
| Tightening torque | 0.4 Nm |
| Power consumption | 0,56 W |
| Operating temperature | -25 ÷ 50 °C |
| Dimensions | 1 module (18 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |