FW-STR1P F&F radio shutter controller for fi60 box
- FW-STR1P F&F radio shutter controller for fi60 box
Radio shutter controller for fi60 box FW-STR1P F&F
Product description
Features of the module
* Controller of roller shutters with AC motors;
* Cooperation with F&Wave remote control transmitters;
* Controllable from up to 8 transmitters;
* Two local control inputs - possibility to directly control the relay with any monostable button (e.g. bell);
* Two output contacts for both directions of roller shutter movement with load capacity of 0.6 A (AC-3);
* Small housing size;
* Screw terminals for easy installation in a Ø60 flush-mounted box;
* Retransmission of commands from the transmitter - possibility to increase the range of remote control;
* Low power consumption - low operating cost;
* Built-in electronic thermal protection, preventing damage in case of excessive load on the controller;
* Electrical interlock to prevent power switching on both motor windings.
Operating range
In open space without the presence of interfering factors, the range of radio-controlled devices oscillates within 100 m. In built-up conditions and in the presence of sources of interference (power lines, transmitters, etc.) the actual range may be shorter. The range can be improved by direct retransmission of modules within each other's range.
Technical data:
| Power supply voltage | 100÷265 V AC |
| Number of channels | 1 |
| Function | roller shutter controller |
| Control inputs | 1 |
| Control signal | L or N |
| Output load capacity (AC-1) | 8 A |
| Output load capacity (AC-3) | 1,5 A |
| Executive element | relay |
| Radio frequency | 868 MHz |
| Connection | screw terminals 2.5 mm² |
| Tightening torque | 0.4 Nm |
| Power consumption standby/work | 0.25 W / 1 W |
| Operating temperature | -25 ÷ 65°C |
| Dimensions | 1 module (18 mm) |
| Protection degree | IP20 |