Surface mounted PIR motion detector IP65 180° white DR-04 W F&F
- Surface mounted PIR motion detector IP65 180° white DR-04 W F&F
Surface mounted PIR motion detector IP65 180° white DR-04 W F&F
Product description
Surface mounted. IP65.
The motion sensor is used for automatic, temporary switching of lighting in the event of the appearance of a person or other object in such places as corridors, courtyards, approaches and driveways, garages, etc.
Operation
The infrared motion sensor(PIR motion sensor) detects the movement of heat sources within its range. Detection efficiency is affected by the amount of heat emitted by the moving object, its size, as well as the direction and speed of movement. Ambient temperature is also an important factor.
A PIR motion sensor will be least effective when:
- the temperature of the moving object is close to the ambient temperature (e.g. a sunny room, a radiator in the detection field, etc.),
- the object is moving at low speed directly towards the motion sensor,
- the size of the moving object will be small compared to the area of the detection zone.
Malfunctioning of the PIR motion sensor can occur, for example, when there are light sources in its detection field. Turning the light on or off then causes a large and rapid change in the temperature of the bulb, which can be interpreted by the PIR motion sensor as a moving object.
Power table
The above data are indicative and will largely depend on the design of the specific receiver (especially for LED bulbs, energy-saving lamps, electronic transformers and switching power supplies), frequency of switching and operating conditions.
Technical data:
Supply voltage | 230 V AC |
Maximum load current AC-1 | 5 A |
Off time | 10 s±3 s ÷ 15 min. (±2 min.) |
Twilight activation threshold | 3÷2000 Lx |
Motion detection | 0.6÷1.5 m/s |
Horizontal detection field | 0°÷180° |
Vertical detection field | 0°÷45° |
Max. adjustable detection radius (h: 2.5 m, Temp. ? 24 °C) | 12 m |
Mounting height of the sensor | 1,8÷2,5 m |
Head rotation range - horizontal/vertical | 60°/180° |
Type of detection | infrared radiation |
Connection | screw terminals 1.5 mm² |
Tightening torque | 0,3 Nm |
Power consumption | 0,5 W |
Operating temperature | -20÷40°C |
Dimensions | vertically unfolded head: S80×W52×G120 mm; head folded horizontally: S80×W52×G95 mm |
Mounting | surface mounted |
Degree of protection | IP65 - hermetic |