Pulse counter CLI-02 F&F
- Pulse counter CLI-02 F&F
Pulse counter CLI-02 F&F
Product description
Pulse counter. Programmable.
Pulse counters are used to count AC/DC voltage signals generated by additional external devices to determine the number of cycles performed in automation systems, e.g. to control the number of press strokes, the number of rotating device rotations, the number of parts coming off the production belt, etc.
Pulse counters are used to count AC/DC voltage signals generated by additional external devices to determine the number of cycles performed in automation systems, e.g. to control the number of press strokes, the number of rotating device rotations, the number of parts coming off the production belt, etc.
Pulses are counted according to an individual program set by the user. When the limit value is reached, the counter will perform an action configured according to the user's individual needs.
Counter functions
- control panel, allowing to program and monitor the operation of the device
- counter input suitable for operation with AC/DC signals with amplitude from 10 to 264 V and frequency up to 50 Hz for AC signals and 5 kHz for DC signals
- adjustable PRÓG parameter from 1÷99 999 999 defining the limiting number of pulses to be counted in each cycle of operation
- countdown mode "down" from the set value, with indication of reaching zero (e.g. 9999→0)
- selection of the input pulse edge (rising or falling) to which the counter will respond
- external reset input RESET
- possibility of automatic resetting of the local counter (loop operation) with possibility to set selected relay action
- relay output signaling achievement of set counter status
- selection of relay action: pulse of preset time length; change of state ON→ON or OFF→ON
- local counter, reset by external reset input, or by RESET button
- global counter (TOTAL), counting all pulses (operation in loop 0→ 99,999,999→0→ .... or reset from the counter configuration menu)
- digital filter, allowing to limit the maximum frequency of counted pulses (to eliminate interference at the counter input)
- memory of the local and global counter status after power failure
- rescaling of the value of counted pulses according to the preset multiplier or divider
- blocking access to the software menu by PIN code
- definition of display backlighting mode
- software menu in one of three languages: Polish, English or Russian
Technical data:
Type | pulse counter |
Supply voltage | 24÷264 V AC/DC |
Communication interface | NONE |
Counting input - voltage - low state | 0÷5 V AC/DC |
Counting input - voltage - high state | 10÷264 V AC/DC |
Counting input - frequency for DC signal | max. 5 kHz |
Counting input - frequency for AC signal | 50 Hz max |
RESET input - voltage | 24÷264 V AC/DC |
Load current of 1xNO/NC contact | 8 A |
Maximum counted value | 99999999 |
Connection | screw terminals 4.0 mm² |
Tightening torque | 0.5 Nm |
Power consumption | 1,5 W |
Operating temperature | -20÷50°C |
Dimensions | 3 modules (52,5 mm) |
Mounting | on a 35 mm rail |
Protection degree | IP20 |
CLI-02 F&F
Ask a question
2 years
2 years
Write your opinion