Twilight automatic with external hermetic probe 230V 16A 1 module AZ-112 F&F
- Twilight automatic with external hermetic probe 230V, 16A, 1 module, AZ-112, F&F
AZ-112 230 V twilight automatic
AZ-112-230V
230 V power supply. Maximum load 16 A. For 35 mm rail. External probe ?10 mm included.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of lighting - turns off at dawn and turns on at dusk.
Operation
Place the device in a place with constant access to natural daylight, which by changes in its intensity will cause switching on and off the lighting. The time of switching on the lighting can be set by the user with a potentiometer. A turn towards the "moon" - will switch on later, turn towards the "sun" - will switch on earlier. The device has a delay system for switching on and off the lighting, thus eliminating the impact of interference (e.g. lightning) on the operation of the device.
ATTENTION!
There is a possibility of special design of dusk automats for other voltages than those given in the technical data table, e.g. 12 V, 24 V, 48 V and 110 V AC/DC and others.
Technical data
| Supply voltage | 230 V AC |
| Supply voltage tolerance | -10 ÷ 10 % |
| Maximum load current AC-1 | 16 A |
| Executive element | relay |
| Contact configuration | 1 × NO |
| Contact separation | YES |
| Tripping threshold - adjustable | 2 ÷ 1000 Lx |
| Tripping threshold - adjustable | approx. 7 Lx |
| Hysteresis | approx. 15 Lx |
| Delay of activation tripping | approx. 10 s |
| OFF tripping delay | approx. 20 s |
| Protection degree of the probe | IP65 |
| Photosensitive element | external probe ? 10 mm |
| Connection | screw terminals 2.5 mm? |
| Tightening torque | 0.4 Nm |
| Power consumption | 0,56 W |
| Operating temperature | -25 ÷ 50 °C |
| Dimensions | 1 module (18 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |