PA-02-MBT F&F panel signal transmitter
- PA-02-MBT F&F panel signal transmitter
PA-02-MBT F&F panel signal transmitter
Product description
PA-02-MBT is a panel signal transmitter 0÷20 mA/0÷10 V with the ability to set two independent alarms that control two relays.
The result is scaled according to the linear characteristics set by the user.
The device is equipped with Modbus RTU, which allows remote configuration and reading of measured parameters. The module is enclosed in a 36×72 mm panel housing with a 14 mm display on the front panel. In addition, there are LEDs on the front panel indicating the current status of the alarm outputs and a LED indicating Modbus communication. Buttons are used for local configuration of device parameters.
| Type | signal converter |
| Power supply voltage | 9÷30 V AC/DC |
| Contact configuration | 2 × NO/NC |
| Contact separation | YES |
| Measuring input | separated 0÷20 mA/0÷10 V |
| Alarm hysteresis | 1÷9999 |
| Lower alarm threshold | -999÷9998 |
| Upper alarm threshold | -998÷9999 |
| Alarm delay | 0 s÷180 s |
| Display | 4-digit LED (digit height 14 mm) |
| Measurement accuracy | 1% |
| Communication protocol | MODBUS RTU |
| Speed - adjustable | 1200÷115200 bit/s |
| Data bits | 8 |
| Stop bits | 1 or 2 |
| Parity bits | EVEN / ODD / NONE |
| Address | 1÷247 |
| Relay load current | 6 A |
| Maximum current consumption | 100 mA |
| Connection | screw terminals 1.5 mm² |
| Tightening torque | 0.4 Nm |
| Working temperature | -10÷40°C |
| Dimensions | 72 ×36 ×72 mm |
| Mounting hole | 66 mm × 66 mm |
| Mounting | board |
| Degree of protection | IP20 |
MAX-PA-02-MBT F&F
Ask a question
2 years
2 years
Write your opinion