FW-STR1P-P F&F 230V canned radio shutter controller

Features of the module

• Controller of roller shutters with AC motors;
• Cooperation with F&Wave remote control transmitters;

Multifunctional roller shutter controller. Realized functions:

• 230V drive controller
• local and remote control
  • - 1-button,
  • - 2-button,
  • - 2-button central;
• interlock function, preventing switching on;
• power supply to both motor windings;
• each button/transmitter (local and remote) can perform a different function;
• possibility to associate the controller with 32 transmitters;
• Two local control inputs - possibility to directly control the relay using any monostable button (e.g. bell);
• Two output contacts for both directions of roller shutter movement with load capacity of 0.6 A (AC-3);
• Small housing size;
• Screw terminals for easy installation in a Ø60 flush-mounted box;
• Retransmission of commands from the transmitter - possibility to increase the range of remote control;
• Low power consumption - low operating cost;
• Built-in electronic thermal protection, preventing damage in case of excessive load on the controller;
• Electrical interlock to prevent power being applied to both motor windings
• In 1-button mode, and 2-button Up and Down, a short press of the button turns on the motor for the programmed time. Long press (>1 s) - the motor runs as long as the button is pressed. This function can be used, for example, to control the slope of the slats;

Operating range
In open space, without the presence of interference factors, the range of radio-controlled devices oscillates within 100 m. In built-up conditions and in the presence of sources of interference (power lines, transmitters, etc.), the actual range may be shorter. The range can be improved by direct retransmission of modules that are in each other's range.