Twilight automatic with external probe PLUS 16A 230V AZ-B-PLUS F&F
- Twilight automatic with external probe PLUS 16A 230V AZ-B-PLUS F&F
Automatic twilight switch with external probe PLUS 16A 230V AZ-B-PLUS F&F
Product description
Twilight switch with external probe PLUS included. To be mounted on a 35 mm rail.
Power supply 230 V. Maximum load 16 A.
Twilightswitch is used to control light sources or other energy receivers depending on the intensity of lighting - turns off at dawn and turns on at dusk.
Operation
AZ-B PLUS twilight switch should be placed in a place with constant access to natural daylight. The light with changes in its intensity will cause the lighting to switch on and off. The time when the lighting is switched on can be set by the user with a potentiometer. Turning towards the "moon" - will switch on later, turning towards the "sun" - will switch on earlier. aZ-B PLUS twilight switch has a system that delays switching on and off the lighting, thus eliminating the impact of interference (such as lightning) on the operation of the device.
Power table
Technical data:
| Supply voltage | 230 V AC |
| Supply voltage tolerance | -10 ÷ 10 % |
| Maximum load current AC-1 | 16 A |
| Executive element | relay |
| Contact configuration | 1 × NO |
| Contact separation | NO |
| Tripping threshold - adjustable | 2 ÷ 1000 Lx |
| Tripping threshold - adjustable | approx. 7 Lx |
| Hysteresis | approx. 15 Lx |
| Delay of activation tripping | approx. 10 s |
| OFF tripping delay | approx. 20 s |
| Protection degree of the probe | IP65 |
| Photosensitive element | pLUS external probe |
| Connection | screw terminals 4.0 mm² |
| Tightening torque | 0.5 Nm |
| Power consumption | 0,8 W |
| Operating temperature | -25 ÷ 50 °C |
| Dimensions | 2 modules (35 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |