Transmitter for flush-mounted box fi60 FW-RC4-AC F&F

Features of the module

* 4-button remote control transmitter powered by 230V mains;
* Works with remote control receivers of the F&Wave system;
* Ability to control any number of receivers;
* On/off functionality (bistable switch) with receivers FW-R1P, FW-R1D, FW-R2P, FW-R2D, FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
* Raise/lower roller shutter functionality with FW-STR1P, FW-STR1D receivers;
* Light dim/brighten functionality with receivers FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
* Ability to reconfigure input S1 to ON function - always turn off paired receivers and/or lower the roller shutter;
* Possibility to change S2 input configuration to OFF function - always turn on paired receivers and/or raise the roller shutter;
* Small size of the housing;
* Screw terminals for easy installation in Ø60 flush-mounted box;
* Low power consumption - low operating cost.

F&Wave system

This is a proposal for All who want to increase the comfort of life.

F&Wave is an easy to install and extremely simple to use system for wireless control of everyday devices. It allows you to remotely control lighting, smoothly adjust the brightness of lighting, control roller blinds, shutters, awnings, entrance and garage doors and other devices in the house.
Thanks to the simplicity of installation and easy configuration of system components, F&Wave fits perfectly into the DIY concept. At the same time, it is inexpensive and efficient.
A unique feature of the F&Wave system is signal retransmission - any receiver that receives a control signal from a transmitter automatically transmits it further. This greatly increases the control range for receivers that are far enough from the transmitter to be out of range of the original signal.
The system consists of receivers - actuators. They are manufactured in a version for mounting in a Ø60 flush-mounted box or for mounting on a TH-35 rail (width of 1 module, i.e. 17.5 mm). In addition to receivers, there are also transmitters in the F&Wave system. These are hand-held remote controls or devices for flush-mounted box.

Operating range
In open space without the presence of interfering factors, the range of radio-controlled devices oscillates within 100 m. In built-in conditions and in the presence of sources of interference (power lines, transmitters, etc.), the actual range may be shorter. The range can be improved by direct retransmission of modules that are in each other's range.