FW-STR1D radio remote control for roller shutters F&F
- FW-STR1D radio remote control for roller shutters F&F
FW-STR1D F&F radio remote control for roller shutters
Features of the module
* Roller shutter controller with AC motors;
* Cooperation with F&Wave remote control transmitters;
* Controllable from up to 8 transmitters;
* Two local control inputs - possibility to directly control the relay with any monostable button (e.g. bell);
* Two output contacts for both directions of shutter movement with load capacity of 1.5 A (AC-3);
* Compact housing - one field in the switchboard;
* Retransmission of commands from the transmitter - possibility to increase the range of remote control;
* Low power consumption - low operating cost;
* Built-in electronic thermal protection to prevent damage in case of overloading the relay;
* Electrical interlock to prevent power switching on both motor windings.
F&Wave System
This is a proposal for All who want to increase the comfort of life.
F&Wave is an easy to install and extremely simple to use wireless control system for everyday devices. It allows you to remotely control lighting, smoothly adjust the brightness of lighting, control roller blinds, shutters, awnings, entrance and garage doors and other devices in the house.
Thanks to the simplicity of installation and easy configuration of system components, F&Wave fits perfectly into the DIY concept. At the same time, it is inexpensive and efficient.
A unique feature of the F&Wave system is signal retransmission - any receiver that receives a control signal from a transmitter automatically transmits it further. This greatly increases the control range for receivers that are far enough from the transmitter to be out of range of the original signal.
The system consists of receivers - actuators. They are manufactured in a version for mounting in a Ø60 flush-mounted box or for mounting on a TH-35 rail (width of 1 module, i.e. 17.5 mm). In addition to receivers, there are also transmitters in the F&Wave system. These are handheld remote controls or devices for flush-mounted box.
Operating range
In open space without the presence of interfering factors, the range of radio-controlled devices oscillates within 100 m. In built-in conditions and in the presence of sources of interference (power lines, transmitters, etc.), the actual range may be shorter. The range can be improved by direct retransmission of modules that are in each other's range.
Technical data:
| Power supply voltage | 100÷265 V AC |
| Number of channels | 1 |
| Function | roller shutter controller |
| Control inputs | 1 |
| Control signal | L or N |
| Output load capacity (AC-1) | 8 A |
| Output load capacity (AC-3) | 1,5 A |
| Executive element | relay |
| Radio frequency | 868 MHz |
| Connection | screw terminals 2.5 mm² |
| Tightening torque | 0.4 Nm |
| Power consumption standby/work | 0.25 W / 1 W |
| Operating temperature | -25 ÷ 65°C |
| Dimensions | 1 module (18 mm) |
| Mounting | on a 35 mm rail |
| Protection degree | IP20 |