Time relay PCU-504 UNI F&F
- Time relay PCU-504 UNI F&F
Time relay PCU-504 UNI F&F
Product description
Time relay is used for time control in industrial and home automation systems (such as ventilation, heating, lighting, signaling, etc.).
The relay has a hold function of up to 10 minutes and contact switching after a power supply failure.
Operation
Functions:
A-SUSTAIN
When the relay is energized, the contacts are switched on (position 5-4/8-7). After the power supply voltage is lost, the contact switching is maintained for the preset time. After the set time the contacts will be disconnected (position 5-6/8-9).
B-DELAYED SWITCHING ON
After the supply voltage is applied the contacts remain open (position 5-6/8-9) for the set time. After the time elapses, the contacts are switched on (position 5-4/8-7) until the supply voltage is lost.
C-DELAYED CLOSING WITH HOLDING
After the supply voltage is applied, the contacts remain open (position 5-6/8-9) for the set time. After the time has elapsed, the contacts are switched on (position 5-4/8-7). After the supply voltage is lost, the contacts are kept on for the set time. After the set time the contacts will be disconnected (position 5-6/8-9).
Attention!
* When the power is on, the system does not react to the change of time and function settings.
* Operation with new function and time settings occurs after the power supply is switched off and switched on again.
Technical data:
Power supply voltage | 12÷264 V AC/DC |
Operation mode | with backup after power supply failure |
Executive element | relay |
Maximum load current | 2 × 4 A |
Contact configuration | 2 × NO/NC |
Contact separation | YES |
Tripping delay | 50 ms |
Contact status indication | LED red |
Operation time - adjustable | 0,1s÷10 min. |
Power supply signaling | LED green |
Connection | screw terminals 2.5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 0,56 W |
Operating temperature | -25 ÷ 50 °C |
Dimensions | 1 module (18 mm) |
Mounting | on a 35 mm rail |
Protection class | IP20 |