Motion sensor for fi60 360° IP20 can DR-08 F&F
- Motion sensor for fi60 360° IP20 can DR-08 F&F
Motion sensor for fi60 360° IP20 can DR-08 F&F
Product description
For flush mounted box Ø60. IP20.
Motion sensor is used for automatic, temporary switching of lighting in case of appearance of a person or other object in such places as: corridors, courtyards, approaches and driveways, garages, etc.
The motion sensor can operate indoors and outdoors. Outdoors only in places where the sensor's housing and its electrical connection points are not exposed to direct rain or snowfall and the possibility of splashing with water or other liquid.
CAUTION!
If the motion sensor is mounted too close to the light source being switched on, the system may become excited, i.e. the sensor will automatically switch the light source on and off. It is necessary to move the sensor away from the light source being switched on to an appropriate distance.
Operation
A motion sensor with infrared detection(PIR sensor) detects the movement of heat sources located in its area of operation. The effectiveness of detection is affected by the amount of heat emitted by the moving object, its size, as well as the direction and speed at which it moves. Ambient temperature is also an important factor.
The effectiveness of a PIR sensor will be lowest when:
- the temperature of the moving object is close to the ambient temperature (e.g., a sunny room, a radiator in the detection field, etc.),
- the object is moving at low speed directly towards the motion sensor,
- the size of the moving object will be small compared to the area of the detection zone.
For example, light sources in the sensor's detection field can lead to malfunction of PIR sensors. Turning a light on or off causes a large and rapid change in the temperature of the bulb, which can be interpreted by the PIR sensor as a moving object.
Power table
The above data are approximate and will largely depend on the design of the specific receiver (especially for LED bulbs, energy-saving lamps, electronic transformers and switching power supplies), switching frequency and operating conditions.
Technical data:
| Supply voltage | 230 V AC |
| Maximum load current AC-1 | 5 A |
| Off time | 3s÷9min. (±2 min.) |
| Twilight activation threshold | 3÷2000 Lx |
| Motion detection | 0.6÷1.5 m/s |
| Horizontal detection field | 360° |
| Max. adjustable detection radius (h: 2.5 m, Temp. ? 24 °C) | 2 m |
| Mounting height of the sensor | 2,0÷3,0 m |
| Type of detection | infrared radiation |
| Connection | terminals 1mm² |
| Tightening torque | 0,25 Nm |
| Power consumption standby/work | 0.10 W/0.45 W |
| Operating temperature | -10÷40°C |
| Dimensions | external: Ø:105 mm, h:71,5 mm; keyhole: Ø:50 mm, h:43 mm; mounting hole: Ø:51 mm |
| Mounting | two screws to the ground or in a Ø60 flush-mounted box |
| Degree of protection | IP20 |