F&F AT-1I current temperature transmitter
- F&F AT-1I current temperature transmitter
F&F AT-1I current temperature transmitter
Product description
The AT-1I transmitter is designed to measure temperature with an external temperature sensor and convert the measured value to a unified analog current output signal in the range of 4÷20 mA.
Operation
The AT-1I transmitter performs continuous conversion of the resistance of the external temperature sensor to a DC output current signal in the range of 4÷20 mA. As a result of the transformation, a current proportional to the temperature of the environment in which the temperature sensor is located appears at the output.
The transmitter works with a resistance temperature sensor of the KTY81-210 type (or analog).
Temperature probes manufactured by F&F: RT probe or RT2 probe. Probes available separately.
The signal output of the module is protected by an anti-interference filter, which eliminates network interference that affects the accuracy of the transmitted signal. This allows the use of signal cables of up to 300 m in length.
Technical data:
| Supply voltage | 9÷30 V DC |
| Measurement range | -50°?÷100°? |
| Temperature probe | RT/RT2 |
| Maximum measurement error | ±1,5°? |
| Output signal | 4÷20 mA |
| Conversion error | ±0,5% |
| Signal output cable length | 300 m |
| Connection | screw terminals 2.5 mm² |
| Tightening torque | 0.4 Nm |
| Power consumption | 0,8 W |
| Operating temperature | -20÷50°C |
| Dimensions | 1 module (18 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |