DMA-3T F&F current indicator
- DMA-3T F&F current indicator
DMA-3T F&F current indicator
Product description
Panelized. Three-phase.
DMA-3T current indicator is used for continuous reading of the load value of electrical circuits of a three-phase network.
DMA-3T current indicator is used for continuous reading of the load value of electrical circuits of a three-phase network.
Operation
- direct measurement in the range 3×0÷5 A.
- indirect measurement with the use of current transformers
- rescaling of the indicator under the corresponding values of the transformer by means of three buttons on the front of the indicator.
- indirect measurement using current transformers in standard current versions in the range 1÷9000/5 A.
Technical data:
Type | three-phase ammeter |
Supply voltage | 230 V AC |
Display | for each phase 4-digit LED (digit height 14 mm) |
Accuracy of indication | 1% |
Maximum current - direct measurement version | 5 A |
Maximum current - indirect measurement version | depends on the transformer used |
Possible type of transformer to be connected | 1÷9000/5 A |
Connection | screw terminals 1.5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 3 VA |
Operating temperature | -5÷50°C |
Dimensions | 96 mm x 96 mm x 92 mm |
Mounting hole | 92 mm × 92 mm |
Mounting | board |
Degree of protection | IP20 |
DMA-3T F&F
Ask a question
2 years
2 years
Write your opinion