Automatic Staircase Clock Standard 24V 16A 2 modules AS-B24 F&F
- Automatic Staircase Clock Standard 24V 16A 2 modules AS-B24 F&F
Staircase automatic AS-B 24
AS-B-24-24V
24 V power supply. Maximum load 16 A. For 35 mm rail.
Staircase automatic is used to keep the lighting of corridors, staircases or other objects on for a certain time, after which the lighting will be turned off automatically.
Staircase automatic is used to keep the lighting of corridors, staircases or other objects on for a certain time, after which the lighting will be turned off automatically.
Operation
When switched on by a momentary (bell) switch, the automatic staircase lighting device keeps the lighting on for the time set by the knob. After the set time has elapsed the device will switch off the lighting automatically. After switching off the lighting, we can switch it on again.
The above data are indicative and will largely depend on the design of the specific receiver (especially for LED bulbs, energy-saving lamps, electronic transformers and switching power supplies), frequency of switching and operating conditions.
NOTE!
It is possible to specially manufacture staircase automats for other voltages than those specified in the technical data table, such as 12 V, 48 V, 110 V AC/DC or others.
| Supply voltage | 24 V AC/DC |
| Maximum load current AC-1 | 16 A |
| Executive element | relay |
| Contact configuration | 1 × NO |
| Contact separation | NO |
| Tripping delay | less than 1 s |
| Switch-off delay - adjustable | 0,5 ÷ 10 min |
| Antilock | NO |
| Turn-off signaling | NO |
| Cooperation with illuminated buttons | NO |
| Connection | screw terminals 4.0 mm? |
| Tightening torque | 0.5 Nm |
| Power consumption | 1,2 W |
| Operating temperature | -25 ÷ 50 °C |
| Dimensions | 2 modules (35 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |
F&F AS-B 24
Ask a question
2 years
2 years
Write your opinion