Dusk automat hermetic 230V 16A connection: PG7 gland AWZ F&F
- Dusk automat hermetic 230V 16A connection: PG7 gland AWZ F&F
AWZ 230 V twilight automatic
AWZ-230V
230 V power supply. Maximum load 16 A. Hermetic. Light-sensitive element built-in.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of lighting - turns off at dawn and turns on at dusk.
Operation:
Automatically place in a place with constant access to natural daylight, which by changes in its intensity will cause the lighting to switch on and off. The time of switching on the lighting can be set by the user with a potentiometer. Turning towards the "moon" - will switch on later, turning towards the "sun" - will switch on earlier. The device has a delay system for switching on and off the lighting, thus eliminating the impact of interference (e.g. lightning) on the operation of the device.
ATTENTION!
There is a possibility of special design of dusk automats for other voltages than those given in the technical data table, e.g. 12 V, 24 V, 48 V and 110 V AC/DC and others.
Supply voltage | 230 V AC |
Supply voltage tolerance | -10 ÷ 10 % |
Maximum load current AC-1 | 16 A |
Executive element | relay |
Contact configuration | 1 × NO |
Contact separation | NO |
Tripping threshold - adjustable | 2 ÷ 1000 Lx |
Tripping threshold - adjustable | approx. 7 Lx |
Hysteresis | approx. 15 Lx |
Delay of activation tripping | approx. 10 s |
OFF tripping delay | approx. 20 s |
Photosensitive element | built-in |
Connection | screw terminals 2.5 mm? |
Tightening torque | 0.4 Nm |
Power consumption | 0,8 W |
Operating temperature | -25 ÷ 50 °C |
Dimensions | 60×85×35 mm |
Mounting | surface mounted |
Protection class | IP65 - hermetic |