Hermetic twilight automatic 230V 16A AZH-106 F&F
- Hermetic automatic twilight switch, Un=230V, I=16A, connection cable 0.8m, AZH-106, F&F
AZH-106 230 V twilight automaton
AZH-106-230V
230 V power supply. Maximum load 16 A. Hermetic. Light-sensitive element built-in.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of lighting - it turns off at dawn and turns on at dusk.
Operation
Place the automat in a place with constant access to natural daylight, which by changes in its intensity will cause switching on and off the lighting. The time of switching on the lighting can be set by the user with a potentiometer. Turning towards the "moon" - will switch on later, turning towards the "sun" - will switch on earlier. The device has a delay system for switching on and off the lighting, thus eliminating the impact of interference (e.g. lightning) on the operation of the device.
ATTENTION!
There is a possibility of special design of dusk automats for other voltages than those given in the technical data table, e.g. 12 V, 24 V, 48 V and 110 V AC/DC and others.
Technical data
Supply voltage | 230 V AC |
Supply voltage tolerance | -10 ÷ 10 % |
Maximum load current AC-1 | 16 A |
Executive element | relay |
Contact configuration | 1 × NO |
Contact separation | NO |
Tripping threshold - adjustable | 2 ÷ 1000 Lx |
Tripping threshold - adjustable | approx. 7 Lx |
Hysteresis | approx. 15 Lx |
Delay of activation tripping | approx. 10 s |
OFF tripping delay | approx. 20 s |
Photosensitive element | built-in |
Connection | OMY 3×0.75 mm?; length 0.8 m |
Power consumption | 0,56 W |
Operating temperature | -25 ÷ 50 °C |
Dimensions | 51×67×26 mm (± 1 mm) |
Mounting | surface |
Protection class | IP65 - hermetic |