Hermetic twilight automatic 230V 10A connection cable 0,8m AZH F&F
- Hermetic twilight automatic 230V 10A connection cable 0,8m AZH F&F
AZH 230 V twilight automatic
AZH
230 V power supply. Maximum load 10 A. Photosensitive element built-in. Hermetic housing. Surface mounting.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of lighting - turns off at dawn and turns on at dusk.
Operation
Place the twilight switch in a place with constant access to natural daylight, which with changes in its intensity will cause the lighting to switch on and off. The time when the lighting is switched on can be set by the user with a potentiometer. Turning towards the "moon" - will switch on later, turning towards the "sun" - will switch on earlier. AZH twilight switch has a system that delays switching on and off the lighting, thus eliminating the impact of interference (e.g. lightning) on the operation of the device.
NOTE!
There is a possibility of special design of dusk switches for other voltages than those given in the technical data table, e.g. 12 V, 24 V, 48 V and 110 V AC/DC and others.
Technical data
| Supply voltage | 230 V AC |
| Supply voltage tolerance | -10 ÷ 10 % |
| Maximum load current AC-1 | 10 A |
| Executive element | relay |
| Contact configuration | 1 × NO |
| Contact separation | NO |
| Tripping threshold - adjustable | 2 ÷ 1000 Lx |
| Tripping threshold - adjustable | approx. 7 Lx |
| Hysteresis | approx. 15 Lx |
| Delay of activation tripping | approx. 10 s |
| OFF tripping delay | approx. 20 s |
| Connection | OMY 3×0.75 mm²; length 0.8 m |
| Power consumption | 0,56 W |
| Working temperature | -25 ÷ 50 °C |
| Dimensions | 51×67×26 mm (± 1 mm) |
| Mounting | surface |
| Protection class | IP65 - hermetic |
F&F AZH