WI-FI 3 phase electricity monitor,FOX ENERGY 3, WI-MEF3 100A F&F
- WI-FI 3 phase electricity monitor,FOX ENERGY 3, WI-MEF3 100A F&F
WI-FI 3 phase electricity monitor,FOX ENERGY 3, WI-MEF3 100A F&F
Works wirelessly over wi-fi.
Measuring range up to 100 A.
With 100 A transformers.
Monitoring of all relevant parameters of the electrical network.
ENERGY-3-100 - wireless (works over wi-fi network) electricity consumption meter. Records electricity consumption and monitors important parameters of the network - voltage, current, power, energy consumption. Access to the data is possible directly from the application or via a web browser. Communication is done wirelessly via wi-fi and the F&F cloud.
Application of the Energy-3-100 energy monitor (WI-MEF-3-100A)
Monitoring of energy consumption in domestic installations;
Ongoing measurement of power consumption and values of currents and voltages;
Use of recorded measurements to detect voltage or power consumption overruns;
Control of energy production in photovoltaic installations;
Metering of heat pumps.
Features of the Energy-3-100 wireless home energy meter (WI-MEF-3-100A)
- 3-phase, 2-way, 4-quadrant electricity consumption monitor, perfect for, among other things, the supervision of photovoltaic installations and heat pump metering;
- Monitors all relevant parameters of the electric grid;
- Records average, minimum and maximum values;
- Non-invasive mounting on the measured wires using miniature (31.5×31.5×40.5 mm) current transformers;
- Measuring range up to 100 A, suitable for domestic installations;
- High measurement accuracy;
- Access to measurement history via app or web browser;
- Communication via home Wi-Fi network; Remoteaccess guaranteed by the F&F Polish cloud;
- Operation via free mobile apps for Android and iOS;
- Fully Polish solution focused on security and user privacy;
- No hidden operating costs and guaranteed long-term product support;
- Installation of the wifi monitor-counter in the distribution box (DIN rail);
- Comes with 3 current transformers and antenna.
Miniature opening current transformers are supplied with the device. No interference with the current wires is required to fasten them on the measured wires. However, special attention should be paid to the way of putting the wire through the transformer and connecting the secondary side of the transformer to the device.
Technical data:
| Supply voltage | 3× 230/400 V AC (-25%÷15%) |
| Frequency | 50÷60 Hz |
| Installation | 3-phase, 4-wire |
| Accuracy of the meter | 1% |
| Accuracy - measuring transformers | 0,5% |
| Transformers - primary current | 100 A |
| Transformers - secondary current | 30 mA |
| Transformers - conductor diameter | ≤16 mm |
| Meter constant | 1000 imp/kWh |
| Humidity (non-condensing) | ≤ 90% |
| Radio frequency | 2.4 GHz |
| Transmission | WI-FI |
| Radio power (IEEE 802.11n) | ≤ 20 dBm |
| Receiver sensitivity | -98 dBm |
| Connection | screw terminals 2.5 mm² (wire); screw terminals 4.0 mm² (wire) |
| Tightening torque | 0.5 Nm |
| Power consumption | ≤ 2 W |
| Operating temperature | -20÷50°C |
| Dimensions | 2 modules (35 mm) |
| Mounting | on a 35 mm rail |
| Protection class | IP20 |