MAX-MB-TC-1 temperature transmitter For use with K, J, E, N, T, S, R, B thermocouples.
- MAX-MB-TC-1 temperature transmitter For use with K, J, E, N, T, S, R, B thermocouples.
MAX-MB-TC-1 temperature transmitter For use with K, J, E, N, T, S, R, B thermocouples.
Product description
Temperature transmitter.
The device is used to measure temperature with various types of thermocouples. It works with thermocouples of types: K, J, E, N, T, S, R, B.
The transmitter measures the current temperature of the hot junction (thermocouple) and the cold junction (temperature at the thermocouple connection point). With this measurement, it is possible to provide the relative and absolute temperature for the object on which we measure. The device has the ability to set 4 independent alarms. Each of the alarms has the ability to set the tripping hysteresis at 0÷256°C and 2 triggering modes:
- alarm reacts to a decrease in temperature below the set temperature;
- alarm reacts to a rise in temperature above the setpoint.
Technical Data:
- Supply voltage - 9÷30V DC
- Measurement range - depends on the type of sensor
- Ports - RS-485
- Temperature probe - K, J, E, N, T, S, R, B
- Communication protocol - MODBUS RTU
- Type of operation - SLAVE
- Speed - adjustable - 1200÷115200 bits/sec
- Data bits - 8
- Stop bits - 1 / 1.5 / 2
- Parity bits - EVEN / ODD / NONE
- Address - 1÷247
- Maximum measurement error - ±2°C
- Sampling frequency - 10 Hz
- Connection - screw terminals 2.5 mm²
- Tightening torque - 0.4 Nm
- Power consumption - 0.3 W
- Operating temperature: -20÷50°C
- Dimensions - 1 module (18 mm)
- Mounting - on a 35 mm rail
- Protection degree - IP20
F&F MAX-MB-TC-1
Ask a question
2 years
2 years
Write your opinion