DMM-5T-2 network parameters indicator

DMM-5T-2 network parameters indicator

Product description:

Multifunctional indicator of network parameters. Single-phase and three-phase.
It has a certificate of compliance with MID.

Application:

DMM-5T-2 is a 96x96 mm multifunctional universal board indicator. It precisely monitors all relevant parameters of the electrical network - including analysis of the direction of energy flow and distribution of harmonics of voltage and current. It works in systems for direct, semi-direct and indirect measurement. It is equipped with a Modbus RTU communication interface, which allows remote reading of measured values.

Technical Data:

• Type - analyzer of network parameters
• Voltage - 0 - 9999.9kV; Accuracy 0.2%
• Network - 1P2W - Single-phase, two-wire / 3P3W - Three-phase, three-wire / 3P4W - Three-phase, four-wire
• Current measurement - rated current In - 0.25 -5 (6) A (the actual value of the measured current will depend on the size of the current transformers used)
• Current measurement - overload capacity (continuous) - 120% In
• Current measurement - power consumption less than 0.5 VA/phase
• Voltage measurement - measuring range - 58 - 276 V AC (L-N phase voltage), 100 - 480 V AC (L-L phase-to-phase voltage)
• Voltagemeasurement - frequency - 45 - 55 Hz
• Voltage measurement - Overload capacity (continuous)120% Un
• Total power consumption - typical 2 VA, instantaneous 15 VA
• Operating temperature - 25°C - 55°C
• Storage temperature - -40°C - 70°C
• Relative humidity - 0 - 95% (without condensation and aggressive gases)
• Pollution class - 2
• Flammability of the housing - UL94 - V0
• Degree of protection - Front - IP54; Rear - IP20
• Panel thickness - 1 - 5 mm
• Pulse outputs - 2
• RS-485 port - Communication port compatible with Modbus RTU interface; Baud rate: 2400/4800/9600/19200/38400 bps; Parity: none, even, odd; Stop bits: 1, 2
• Current - 0 - 9999.9 kAp; Accuracy: 0.2%
• Power factor - -1 - +1; Accuracy 1%
• Frequency - 45 - 65 Hz; Accuracy 0.2%
• Active power - 0 - 3600 MW; Accuracy 0.5 %
• Reactive power - 0 - 3600 MVAr; Accuracy 1 %
• Apparent power - 0 - 3600 MVA; Accuracy 1 %
• Active energy - 0 - 9999999.9 kWh; Accuracy Class 0.5S (IEC62053-22)
• Reactive energy - 0 - 9999999.9 kVArh; Accuracy 2 %
• Phase angle - Accuracy 2 %
• Current harmonic content factor (su-mar or individual from 2nd - 63rd harmonic) - 0 - 100%; Accuracy 2 %
• Voltage harmon ic content factor (su-mar or individual from 2nd - 63rd harmonic) - 0 - 100%; Accuracy 2 %

Dimensions:

• Width - 96mm
• Length - 96mm
• Height - 62mm

F&F DMM-5T-2